CPU support

Supports LGA1200 slots

Intel 10th and 11th generation processors

Cpus with an F suffix and no integrated graphics card are not supported

chipset

Intel® H510 high-speed chipset

Internal memory

Two SO-DIMM DDR4 memory slots

Up to 128GB supported (depending on CPU specifications)

Supports dual-channel memory technology

Support for 3200/2933/2666/2400/2133 MHZ frequency of memory

11th-generation Intel®Core i5 or later processors are required to support memory frequencies higher than 2666MHz.

reveal

Based on the display function of integrated graphics card processor, it adopts the shared display memory technology

1 HDMI port, up to 4096x2160@30Hz resolution (HDMI1.4 and HDCP2.2)

1 set of LVDS pins, up to 8bit dual-channel LVDS signal, 1920*1200@60Hz resolution

If you do not use LVDS, disable LVDS SUPPORT in the BIOS

Audio frequency

Integrated Conexant CX20632 sound card chip

Supports multiple adoption depth and multiple adoption rate selection

Supports 2.0 channels

1 rear onboard AUDIO IN port, 1 rear onboard AUDIO OUT port

1 set of pre-audio IN pins, 1 set of pre-audio OUT pins (These two pins are F_Aduio pins)

1 set of 4-pin SPEAKER pins to support external housing built-in speaker output

network

Integrated Realtek® GbE NIC Chip (10/100/1000Mbit)

1 on-board RJ45 port

Support network wake up

Supports PXE diskless boot

store

1 M,2 slots (Support 2280 SATA and PCIE X4 channel SSD)

Two SATA3.0 ports

USB

Onboard rear ports: 2 USB3.1 GEN1 ports, 2 USB2.0 ports

In-board pins: 1.5 sets (3) USB2.0 pins, 1 set (2) USB3.1 GEN1 pins

Inboard socket

1 DC-IN interface, 19V input, 5.5*2.5mm size (19V 6.3A or above adapter recommended)

1 4-pin motherboard ATX power supply port, 19V input

Two HDD_PWR hard disk power pins

Two SATA ports

1 set of LVDS panel OC Voltage selector pins (default is 5V)

1 set of booster board power supply pins (0-3.3V negative dimming (0V brightest, 3.3V darkest) is recommended)

1 set of LVDS screen backlight adjustment pins

1 Set of pins for the system fan

1 set of buzzer pins

1 Set of CPU fan pins1 set of CLR_CMOS pins

1 set of switch control indicator pins (F_PANEL)

One M.2 wireless NIC port

Hardware monitoring

Voltage monitoring

Temperature monitoring

Fan monitoring

Intelligent fan speed control (motherboard has been supported, intelligent fan speed control also needs fan support)

Operating system

UEFI Windows10 64bit support

UEFI Ubuntu 64bit support

UEFI UOS 64bit is supported

Etc. (Only UEFI mode systems are supported)

ESD protection

Air discharge ±8KV Class C

±6KV Class B

Contact discharge ±6KV Class C

±3KV Class B

※ Test when the whole machine is well grounded