AOS-N12J19D
Product introduction：
Detailed specifications of motherboard
Project | Description |
Processor | Integrated Intel® Celeron J1900/2.0GHz quad-core processor with 10W TDP Compatible with Intel® Baytrail-I/M/D series CPUs |
Memory | 1*SO-DIMM memory slot, supports single-channel 1600/1333MHz DDR3L/1.35V memory up to 8GB |
Display
| Integrated Intel® UHD Graphics 600 core graphics card |
1* VGA port and 1* HDMI port, or 2 HDMI display ports | |
Support VGA, HDMI synchronous/asynchronous display | |
Network | 2* Realtek RTL8111H Gigabit LAN card (1 network optional), support Wake-on-LAN/PXE |
Storage
| 1* 7pin SATA3.0 hard disk interface, transfer rate up to 6Gbps |
1* mSATA3.0 slot (long card) | |
Audio | Onboard ALC897 7.1-channel hi-fi audio controller Support MIC/Line-out, amplifier (support 2-ohm 5W dual-channel, optional) |
Expansion Slot | 1* Mini-PCIe slot (half card and long card are supported), support WIFI/4G module |
Rear I/O Ports
| 1* HDMI1.4 display interface |
1* VGA display interface (and the 2nd HDMI1.4 interface either one, the default is VGA interface) | |
1* USB 3.0 interface, 1* USB 2.0 interface | |
2* RJ-45 Gigabit network interface (of which LAN2 and dual-layer USB2.0 interface is two choices, the default is the network port) | |
1* 12V~19V DC power input port | |
Front I/O Ports
| 4* USB 2.0 interface |
1* Line out and MIC 2-in-1 interface | |
2* DB9 RS232 serial port (default is RS232, COM1 and COM2 can support RS485 through jumpers) | |
1* Hard disk indicator | |
1* Switch button with light | |
Built-in I/O Ports
| 1* USB 2.0 interface 1*4Pin (need to support 4G when this USB2.0 function is invalid, optional) |
1* Amplifier interface 1*4pin (optional) | |
2* COM interface 2*5Pin (same signal as the front IO interface, optional) | |
1* 4pin power input connector | |
1* Hard disk power supply interface | |
1* Front panel switch button and indicator connector 2*5Pin | |
Fan Interface | Backside CPU fanless cooling design, reserved 1*4pin CPU fan interface |
GPIO | Support 4-way input/output GPIO |
BIOS | 64Mb Flash ROM |
Watchdog | Support hardware reset function (256 levels, 0~255 seconds) |
Operating System | Windows 7/Windows 10/Linux |
Power Supply Type | Adopt DC 12V～19V power supply |
Operating Temperature | 60℃～20℃ |
Storage Temperature | -20℃～70℃ |
Working Humidity | 5%-95% relative humidity, non-condensing |
Dimension | 120mm x 120mm |
Order information
No. | Model | CPU | Core number | frequency | RAM | HDMI | VGA | LVDS | EDP | LAN | USB | PS2 | LPT | COM/485 | POWER |
1 | AOS-N12J19D VER1.3 | J1900 | 4 | 2.0G | DDR3L | 1 | 1 | 1 | / | 1 | 6 | / | / | 2 / 0 | 12V |
2 | AOS-N12J19D VER1.3 | J1900 | 4 | 2.0G | DDR3L | 1 | 1 | 1 | / | 2 | 6 | / | / | 2 / 0 | 12V |
Application field
The NANO series motherboard supports Intel® Baytrail-I/M/D series cpus. Can be widely used in commercial
display, medical instruments, industrial control, financial equipment, cloud terminal and other fields.